BBA-4000 Solar Powered Wireless Break Beam Kit, Perimeter Detection
The BBA-4000-PLUS is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Because the unit is self powered there is no need to run wires for power. Also referred to as a Perimeter Detection Beam, the 4000 series Kits can be used for storage facilities, Car Lots, Driveways and more. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-4000 receiver up to a mile away* anytime someone passes between the sensors.
The break beam sensor is a point to point sensor and will not be activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and other animals but it will detect any intruder walking through the beam area. The beam sensor is ideal for outdoor applications such as storage lots, lumber yards, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.
The DCR-4000 is the standard receiver for our 4000 series products. The receiver will play one of 12 different tunes that are selected at the transmitter so that different zones can be distinguished. The receiver is powered by a 12VDC transformer.
The BBA-4000-PLUS Model can be integrated to additional devices such as alarm systems and security DVR’s
Operating Range: -30°F to 120°F
*Actual range will vary depending on the environment.
Note: this transmitter is only compatible with the 4000 series receivers.
Call us for any of your Access Control Applications 877-880-7728
Ellipse Quality Guarantee
Free Lifetime Technical Support
Not Sure About Your Product or Compatibility? Ask an Expert!