EL-POE-ISP02 PoE Combiner Splitter Adapter Kit, Run 2 IP Cameras one 1 Cable

$17.00

  • Run 2 IP Cameras over 1 Cable
  • Kit Includes Sender and Receiver
  • 30W per Port
  • Up to 328 Feet

StumbleUponEmail

Description

EL-POE-ISP02 PoE Combiner Splitter Adapter Kit, Run 2 IP Cameras one 1 Cable

The EL-POE-ISP02 is an RJ45 Ethernet Combiner and Splitter that will allow 2 IP Cameras to be used on one cable run. This kit comes with two adapters, one for the camera side and one for the PoE/NVR side of the run. Are you looking for creative ways to save on installation costs? Imagine you are on an install and have to mount two IP Cameras in the same location. This happens frequently in places like the corner of a building or dwelling. You can just run 1 cable and use this device for both cameras. In addition, you may be called back to a job to add another camera in a similar location to one that was previously installed. Just use this device and possibly a short run to the new camera and you have saved the time it would have taken to run a completely new cable.

EL-POE-ISP02 PoE Combiner Splitter PRODUCT HIGHLIGHTS:

  • Send power and data to 2 PoE devices over 1 ethernet cable
  • Each connector supports up to 30 watts and up to 100m (328ft)
  • Supports 10/100/1000 IEEE802.at standard PoE switch
  • Works with non PoE devices, send data through a router or switch
  • Quick and easy installation

EL-POE-ISP02 PoE Combiner Splitter

Here at Ellipse Security we are constantly looking for new items to provide our customers with solutions that are convenient and efficient. The EL-POE-ISP02 is an RJ45 ethernet splitter / combiner that transfers power and data through one Cat5, Cat5e, or Cat6 Ethernet cable for two PoE devices. In other words, this kit allows you to provide power and video to (2) IP Cameras, while only having to run one cable. Each RJ45 connector supports up to 30 watt per port and 10/100/1000 data rate connection when using a standard AT PoE switch or injector. This PoE combiner / splitter also works with non PoE devices. You can use a router or switch to send data to a computer, NVR or DVR, while only using one Cat 5 / Cat5e / Cat6 ethernet cable. You can send power and data up to 100m (328ft) with this reliable setup, which results in quicker and easier installations.

 

Example 1: 2 PoE IP Cameras over 1 networking cable

In this example, you can connect the two RJ45 connectors into a PoE switch to send power and data to two separate PoE cameras, while only using one Cat5 / Cat5e / Cat6 ethernet cable. The female RJ45 connector on the device side allows the user to run more ethernet cabling if needed. Sending both ethernet (data) and PoE connections together will restrict cable distance to 100m (328ft) between network ports.

 

Example 2: 2 PoE ports for 1 PoE device

In this example, the PoE cable uses two PoE ports to power one PoE device with a maximum output of 60 watts. The difference between diagram 1 and 2 is the amount of wattage output to the device. As shown in diagram 1, most common PoE switches only output a maximum output of 30 watts per port. However, in this diagram you can achieved up to 60 watts by using two PoE ports to power one device. Sending both ethernet (data) and PoE connections together will restrict cable distance to 100m (328ft) between network ports.

 

Example 3: 2 Non PoE devices over 1 networking cable

In this example, connect the two RJ45 connectors into a router or switch to send data to two separate devices. This PoE combiner / splitter also works with non PoE devices, sending data to a computer, NVR, DVR, etc, while only using one Cat5 / Cat5e / Cat6 ethernet cable. The female RJ45 connector on the device side allows the user to run more ethernet cabling if needed. Sending data over ethernet is limited to a distance to 100m (328ft).

 

Features

  • RJ45 ethernet splitter / combiner that transfers power and data through one Cat5, Cat5e, or Cat6 Ethernet cable for two PoE devices.
  • Supports 10/100/1000 IEEE802.at standard PoE switch (PoE Pin: 1/2+, 3/6-)
  • Each connector supports 10/100/1000mbps data rate and up to 30 watts
  • Cable 1: Features 2 male RJ45 to 1 female RJ45
  • Cable 2: Features 2 female RJ45 to 1 female RJ45
  • Female RJ45 connector on the device side allows the user to run more ethernet cabling if needed
  • Works with non PoE devices, send data through a router or switch
  • Typical applications include IP cameras, IP phones, and other devices that require power and network connection
  • Maximum range for data and PoE: 100m (328ft)
  • Network RJ45 Cable: TIA/EIA 568 Cat5/5e/6
  • Cost efficient, easy, and quick installation

 

Ellipse Quality Guarantee

One Year Warranty

Free Lifetime Technical Support

 

Not Sure About Your Product or Compatibility? Ask an Expert!

Contact

Additional information

Weight .5 lbs
Dimensions 3 × 2 × 2 in

Specification

Downloads

You may also like…